| | | | | |
|
PRODUCT FEATURES - With its compact design and minimized dimensions, it can be described as world’s smallest size selfcontained marine airconditioner.
- Reverse cycle heat/cool models in 8,500<>33,000Btu capacity range.
- AISI304 standard stainless steel cabinet with oven baked electrostatic powder painting.
- High durability and corrosion resistance of cooling components with powder paint coating.
- Unique welded twin drain pan construction, avoiding the penetration of condensation water to compressor section.
- High efficiency, low vibration and noise rotary a/c compressor.
- Copper pipe aluminum fin coil for optimum heat transfer from refrigerant to canin atmosphere.
- High output, low noise centrifugal fan with insulated housing for quiet operation and maximum performance.
- Rubber cushions to minimise compressor vibration.
- Pressure cut-off switch to protect the cooling circuit against failures of water flow.
- 4-way electrical solenoid reversing valve for reverse cycle operation.
- Carrying handle on side of compressor pan for easy handling.
- Automatic on/off feature of sea water pump syncronizing with compressor operation.
- High efficiency, coaxial type cupronickel condenser ultra durable against seawater corrosion.
- Return air filter.
- Small size separate electric box with dimensions 140(L)x115(W)x80(H)(in mm)(TDR control) for convenience in installation. For IRC dimensions shall read as 230(L)x230(W)x90(H).
- Plug-in type controller wiring with 5 meter extension.
- Ultimate performance at high ambient and seawater temperatures.
- TDR type single-component auto mode and fan featured digital controller with fan, dry and heat/cool modes and digital display of room temperature.
- IRC and QDU type two-component controller with additional freeze control feature and remote transmitter(optional) (Note: More information about the control type and features is available at PRODUCTS-à Controllers section)
INSTALLATION KIT FOR THE SYSTEM - Flexible duct 2,5meter/pc
- Electrostatically powder painted air suction and discharge grills with manually adjustable louvers
- Discharge grill adapters for circular duct connection
- Seawater pump for the system
- Water distribution manifolds with adjustable ball valves at outlets
- Stainless steel hose clamps
- Full set brass fittings for water system connection
- Sea water inlet
- Plastic clamps for duct connection
CWS Units of Split Serie | | Main reason to prefer a split system is to eliminate compressor noise and vibration from cabin atmosphere. Like every advantage being accompanied by a disadvantage, such units require pipe connection and coupling to a CWS unit done by a qualified air conditioner technician skilled in installation of home type split units. PRODUCT FEATURES | - With its compact design and minimized dimensions, it can be described as world’s smallest size marine evaporating units.
- Reverse cycle heat/cool models in 7,500<>33,000Btu capacity range.
- AISI304 standard stainless steel cabinet with oven baked electrostatic powder painting.
- High durability and corrosion resistance of cooling components with powder paint coating.
- Copper pipe aluminum fin coil for optimum heat transfer from refrigerant to canin atmosphere.
- High output, low noise centrifugal fan for quiet operation and maximum performance.
- Carrying handle on side of pan for easy handling.
- Return air filter
EWS-Cabin Units(of split serie) | | PRODUCT FEATURES | EWS/CWS series split units are split-into-two versions of SWE/NWE series self-contained type marine air conditioners. | EWS, the evaporating units are installed inside the cabins and compared to self-contained units they feature the advantage of avoiding compressor noise and vibration | Some features are as follows: - Plug-in type controller wiring with 5 meter extension.
- Ultimate performance at high ambient and seawater temperatures.
- TDR/KN7(cooling only) type single-component auto mode and fan featured digital controller with fan, dry and heat/cool modes and digital display of room temperature.
- IRC type two-component recessed controller with additional freeze control feature and remote transmitter(optional) (Note: More information about the control type and features is available at PRODUCTS-à Controllers section)
| | TECHNICAL FEATURES | EWS MODEL NO. | 007 | 010 | 012 | 016 | 018DF | 021DF(*) | 025DF(*) | 030DF(*) | Rated Cool/Heat Capacity (Btu/h): | 7.500 | 10.000 | 12.750 | 16.500 | 20.500 | 23.500 | 27.500 | 32.800 | Heating Capacity (Btu/h): | 9.100 | 11.000 | 15.250 | 17.400 | 21.200 | 25.000 | 28.300 | 34.200 | Air Flow (med)(m3/h): | 250 | 360 | 450 | 600 | 700 | 850 | 900 | 1100 | Power supply(Volt/ph/Hz) | 220V/1ph/50Hz | Rated Energy Consumption (W): | 150 | 150 | 170 | 240 | 300 | 300 | 340 | 480 | Full Load Amps.(FLA): | 0,7 | 0,7 | 0,8 | 1,1 | 1,4 | 1,4 | 1,6 | 2,2 | Flexible Duct Diameter (mm): | 100 | 127 | 127 | 127 | 152 | 152 | 160 | 180 | Controller: | Variety of digital automatic temp. and fan controllers with/without remote transmitter | Cabinet: | Stainless steel 304, with electrostatic powder painting | | UNIT DIMENSIONS | (*)Note: DF reads for double fan construction | Length (mm): | 350 | 350 | 400 | 400 | 550 | 550 | 550 | 600 | Width (mm): | 240 | 240 | 240 | 240 | 240 | 240 | 240 | 240 | Height (mm): | 310 | 310 | 310 | 340 | 340 | 340 | 340 | 365 | | | -------------------------------------------------------------------------------------------------------------------------- SWE/NWE SERİSİ MARİN TİP PAKET KLİMA TEKNİK TANIMI Marin tip paket klimaların evlerimizde kullanılan split tip iki üniteli klimalara göre en önemli farkı, split klimanın dış ünitesi soğutulacak alan dışında olup kompresör çıkışında gaz hava ile soğutulurken, marin tip klimada aynı işlemin denizsuyu yardımıyla olmasıdır. Bu itibarla, dış hava ortamına gereksinim duyulmadığından, bu işlem için cihazın ikiye bölünme gereği de ortadan kalkmakta ve minimize edilmiş ölçülerde tek bir cihaz amaca hizmet etmektedir. - Kompakt tasarımı ve minimize edilmiş ölçüleriyle dünyanın en küçük paket tip marin kliması
- 8,500<>41,500Btu kapasite aralığında ters çevrimli sıcak/soğuk modeller
- Elektrostatik toz fırın boyalı 304 kalite paslanmaz kabin
- Elektrostatik toz fırın boyalı soğutma ekipmanı
- Yoğuşma suyunun kompresör bölümüne girmesini önleyen ikiz tava sistemi
- Soğutma randımanını arttırıp ses seviyesini asgari düzeye indiren izoleli çok sessiz fan grubu
- Kompresör vibrasyonunu asgariye düşüren kauçuk takoz sistemi
- Pompa arızaları ve su kesilmelerinde soğutma sistemini koruyan emniyet düzeni
- Kompresör çalıştığında su pompasının devreye girmesini sağlayan otomatik kumanda düzeni
- Denizsuyu korozyonuna ultra dayanıklı yüksek verimli kupronikel kondenser
- Yüksek denizsuyu ve çevre sıcaklıklarında üst düzey performans
- TDR veya QDU tip dijital göstergeli sıva üstü + uzaktan kumandalı, veya IRC tip ankastre dijital + uzaktan kumandalı opsiyonel kumanda seçenekleri. (Not: Kumanda tipleri ile ilgili olarak detaylı bilgiyi Ürün Kataloğu seçenekleri içinde bulabilirsiniz.
Paket klimaların çift üniteli split versiyonlarının ürün kodları MARİNEX ve MAIRCON markalarının soğutucu üniteleri için EWS/EWN, kondenser (kompresör) üniteleri için CWS/CWN olarak adlandırılmıştır. |
|
OPERATIONAL PRINCIPLES: The system is made up of a central cooling unit which can be installed in engine room or other space for auxiliary equipments, and fancoils which are coupled to the central unit through piping or hoses. The water chilled by central unit is sent through the circulation pumps to the fancoils in the cabins and the cooling capacity is transferred by the fans of fancoils to the cabin atmosphere. Eventually, the circulated water getting relatively warmer, returns to the central unit for recycle of cooling process. In Heating mode, the 4-way reverse cycle valve changes the position of gas line. Thus, the heat which is normally extracted to the sea in Cooling mode, is now transferred to the circulated water in the system. The central unit and the units in the cabins operate independent from one another. Both units have separate controllers for individual operations. Every central unit is precharged with refrigerant and fully tested for operational features as well as leakage, before shipment. PRODUCT FEATURES: Compact design with rigid construction. AISI 304 standard stainless steel cabinet Electrostatically powder painted and oven baked cooling components. Depending on the selected capacity, termally protected high efficiency rotary, scroll or piston type cooling compressor. Filter drier for gas line. Reversing valve for change of gas direction(only heat/cool models) Gas return line accumulator for hindering liquid gas return to the compressor. Fully automatic, digital, programmable chiller controller. Easily accessible component layout for maintenance and servicing. Top mounted, easily serviceable electric box. Separate pump and expansion tank for flexible installation. Timer feature to protect compressor and cooling system on short energy breakdowns. Automatic shut-off and error display feature on pump or other system failures. Time balance feature of compressor operations for 2- and 4-stage systems(optional) Separate signal lights for cooling and heating modes. Low and high pressure manometers for monitoring each cooling circuit. Standby, error and operation signals for each cooling circuit. Digital temperature displays for return and leaving chiller water temperatures. Cu-Ni self-cleaning coaxial type condenser for ultimate resistance against seawater corrosion Zinc-anode protection against stray currents. MULTIPLE-STAGE UNITS: NHM(mono), NHD(twin), NHT(triple), NHQ(quadro) chillers are designed for medium and larger size boats, which either have very little space in the cabins for self-contained units and/or require utmost silence and quietness. The single stage(one compressor and cooling circuit) chillers are manufactured as standart production within 30.000Btuß-> 155.000 Btu range ÜRÜN ÖZELLİKLERİ: | HWS Serisi tek gruplu merkezi klimalar standart olarak 30.000Btu ile 155.000 Btu soğutma kapasitesi aralığında üretilir. Müşteri talebine göre tekli olarak 200.000Btu ya kadar cihaz üretimi yapılmaktadır. Daha yüksek kapasitelere gereksinim duyulduğunda iki gruplu HWS2X veya dört gruplu HWS4X üniteler seçilebilir. Standart üretim, monofaze 220V-50Hz ve 380V-50Hz voltaj beslemelerine uygundur. Monofaze cihazlar, kompresörler için enerji beslemelerdeki sınırlamalardan dolayı tek gruplu(kompresör ve soğutma devreli) olarak ancak 40.000Btu soğutma kapasitesine kadar mevcuttur. Monofaze olup, daha fazla soğutma kapasitesine gereksinim duyulan projelerde HWS2X veya HWS4X, yani iki veya dört kompresör/soğutma devreli grıplar yardımıyla çözüme gidilebilir.9ancak 02530 koBu cihazlar özellikle soğutulacak alanda klima koyulacak yeri çok sınırlı olan ve/veya olabildiğince sessizlik istenen orta ve büyük boy teknelerin klimatize edilmesi için tasarımlanmıştır. Çalışma Prensipleri: Sistem, teknenin makine veya yardımcı ekipmanlar bölümüne yerleştiren bir ana soğutucu ünite(HWS) ve bu üniteye hortum veya borularla bağlı fancoil(FWS) cihazlarından meydana gelir. HWS'de soğutulan su sirkülasyon pompası vasıtasile kabinlerdeki fancoil cihazları üzerinden sirküle eder ve üretilen soğutma kapasitesi fancoil cihazları tarafından fan yardımıyla kabin atmosferine aktarılır. Bu sırada ısınan su tekrar ana üniteye döner ve işlem sürekli bir çevrim olarak tekrarlanır. Isıtma konumunda ise, 4-yollu dönüşüm vanası gazın yönünü ters çevirerek, normalde denizsuyu vasıtasile dışarı atılan ısının sirkülasyon hattına aktarılmasını sağlar. Sistemin çalışma şekli ve şeması, esas itibarile bir kat kaloriferindekinden farksızdır. Ana ünite(HWS) ve kabinlerdeki(FWS) cihazlar birbirlerinden bağımsız olarak çalışırlar. HWS'nin çalışması için FWS'lerin çalışmasının gerekmediği gibi, FWS'ler de HWS'den bağımsız çalışırlar. Her iki tip cihazın kontrolu ise üzerlerinde bulunan kendi kumandalarıyla sağlanır. Her cihaz üretimde soğutma gazı şarj edilmiş, fabrikada kaçak ve performans testleri yapılmış olarak sevk edilir. |
|
|
PRODUCT FEATURES | All are tailor-made per customers' external dimensions and connection sizes for gas and water. Construction is coaxial type seamless tube-in tube leaving no risk for water invasion to gas line rendering long life against corrosion. | TECHNICAL FEATURES | Water line: 18mm OD Material: Cu seamless tube for evaporators and Cu-Ni(90/10) seamless tube for condensers. Gas line: 22mm OD Construction: Coaxial type tube-in-tube. Capacity range: 7000Btu to 150.000Btu in an evaporator bundle. Finish: Electrostatically painted in white or depending on order quantity as per customer's color choice. Technical backup is possible based on customer's capacity requirement and size limitations. | |
|
FWS/ NFW (Cabin Units) PRODUCT FEATURES - Electrostatically powder painted, oven baked heat exchanger
- Electrostatically powder painted drain pan, hood and fan housing, all made of stainless steel AISI 304 material
- Very compact design and ultra low dimensions, making it one of world’s smallest marine fancoils.
- Copper pipe/aluminum combination heat exchanger with high heat transfer efficiency.
- High output, low noise centrifugal blower, insulated for ultra quietness and high cooling efficiency.
- 3-speed fan speed selection.
- Electrical water inlet cut-off valve(optional).
- Variety of room controller selection like electro-mechanical(SHR), on board digital(TDR) or recessed digital with/without remote transmitter (IRC).
- Whole series is in accordance with applicable CE directives and air conditioning standards.
MARINEX, FWS SERİSİ FANCOİL CİHAZLARI(ODA ÜNİTELERİ) (7.000<--->24.000BTU) | | ÜRÜN ÖZELLİKLERİ | FWS (Oda Üniteleri) - Elektrostatik toz, fırın boyalı, ısı eşenjörü ve tamamı 304 kalite paslanmaz malzemeden tava, davlunbaz ve fan grubu
- Dünyanın en küçük üniteleri özelliğinde çok az yer kaplayan kompakt tasarım
- Bakır/alüminyum yüksek ısı transfer özellikli ısı eşanjörü
- Yüksek çıkış basınçlı santrifüj fan
- 3-hızlı sessiz fan motoru
- Elektrikli solenoid su kesme vanası(opsiyonel)
- Mekanik, duvar üstü dijital veya ankastre dijital uzaktan kumanda seçenekli oda termostatları (Daha fazla bilgiyi Ürün Kataloğu-->Kumandalar bölümünde bulabilirsiniz)
| TEKNİK ÖZELLİKLER | FWS Serisi Marin Fancoil Model No | 007 | 010 | 012 | 015 | 018 | 021 | 024 | Nominal Soğutma/ Isıtma (Btu/hr): | 7.000 | 9.500 | 12.250 | 15.000 | 18.250 | 20.500 | 24.000 | Hava Debisi (med)(m3/h): | 250 | 360 | 450 | 560 | 700 | 800 | 900 | Su Giriş-Çıkış (inch): | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | Kontrol: | Dijital göstergeli, otomatik sıcaklık kontrollu, elektronik kumanda | Gövde: | Komple paslanmaz sactan mamul | | | | Enerji Tüketimi (watts) | 75 | 75 | 75 | 100 | 100 | 190 | 190 | Uzunluk (mm) (A) | 340 | 340 | 390 | 440 | 440 | 440 | 440 | Genişlik (mm) (B) | 370 | 370 | 370 | 410 | 410 | 410 | 410 | Yükseklik (mm) © | 260 | 310 | 310 | 340 | 340 | 340 | 340 | Fleks.Kanal Çapı (mm) | 100 | 127 | 140 | 150 | 150 | 160 | 160 | Net Ağırlık (kg) | 12,5 | 13,5 | 14 | 19,5 | 20 | 20,5 | 20,5 | Brüt Ağırlık (kg) | 13 | 14 | 14,5 | 20 | 20,5 | 21 | 21 | | | | | | | | | | |
|
DESCRIPTION: Shell & tube type heat exchangers with all ancillaries are used to transfer heat from higher temperature fluid to a secondary lower temperature fluid. Depending on the application, intention is sometimes to use the heat of higher temperature fluid and in other cases the lower one. As it happens in air conditioning heat-pump systems, depending on the season both primary and secondary fluids can act as heat dissipater or absorber. While one fluid is mostly water, the other one can be again water, oil, a chemical fluid or gas. Although the name itself defines the primary fluid as ''water'', there may be cases where non of the fluids are water. In this section you will find features, technical details, operating principles and pictures of various types of commercial and industrial coolers/ heat exchangers. If you are not able to find here what you are looking for, we would strongly recommend you to contact us through our e-mail address. We will definitely find a solution for your requirement. The product codes of various types of shell & tube heat exchangers and its ancillaries covered in this section are as follows EVAPORATORS: EMST Series: Marine shell & tube type ECCT Series: Copper tubing in-tank type(tubing only) EWCT Series: Copper tubing-in-tank with housing EWST Series: Tab water shell & tube type EWSU Series: Tab water shell & tube type with U shaped tubing EWSR Series: Tab water shell & tube type with reserve tank EWSF Series: Tab water shell & tube flooded type CONDENSERS & COOLERS: CMST Series: Marine shell & tube type CMCT Series: Marine quality Cu-Ni tubing in-tank type CMHT Series: Marine hermetic type COST Series: Oil cooler shell & tube type CWHR Series: Tab water hermetic coolers CWST Series: Tab water shell & tube type
|
|
Features and technical details are described in pictures of relevant documents shown hereunder. Kumandaların kullanım ve teknik özellikleri aşağıda resim olarak gösterilmiştir. |
|
TECHNICAL SPECIFICATIONS | | | | | | | | | | EWS MODEL NO. | 007 | 010 | 012 | 016 | 018DF | 021DF(*) | 025DF(*) | 030DF(*) | Rated Cool/Heat Capacity (Btu/h): | 7.500 | 10.000 | 12.750 | 16.500 | 20.500 | 23.500 | 27.500 | 32.800 | Heating Capacity (Btu/h): | 9.100 | 11.000 | 15.250 | 17.400 | 21.200 | 25.000 | 28.300 | 34.200 | Air Flow (med)(m3/h): | 250 | 360 | 450 | 600 | 700 | 850 | 900 | 1100 | Power supply(Volt/ph/Hz) | 220V/1ph/50Hz | Rated Energy Consumption (W): | 150 | 150 | 170 | 240 | 300 | 300 | 340 | 480 | Full Load Amps.(FLA): | 0,7 | 0,7 | 0,8 | 1,1 | 1,4 | 1,4 | 1,6 | 2,2 | Flexible Duct Diameter (mm): | 100 | 127 | 127 | 127 | 152 | 152 | 160 | 180 | Controller: | Variety of digital automatic temp. and fan controllers with/without remote transmitter | Cabinet: | Stainless steel 304, with electrostatic powder painting | | UNIT DIMENSIONS | (*)Note: DF reads for double fan construction | Length (mm): | 350 | 350 | 400 | 400 | 550 | 550 | 550 | 600 | Width (mm): | 240 | 240 | 240 | 240 | 240 | 240 | 240 | 240 | Height (mm): | 310 | 310 | 310 | 340 | 340 | 340 | 340 | 365 | |
|
|
| |
| |
| | | |
|